Revel Rascal V2 Pinot Gnar with a hint of silver – Robin_Custombikecos Bike Check
Bike of the day
Parts
Frame
Rascal V2
Pinot Gnar (Large)
Frame:
Revel Rascal V2.
Other: Pinot Gnar (large)
Rear shock absorber
Super Deluxe Ultimate Air
Individually tailored
Rear shock absorber:
Rock Shox Super Deluxe Ultimate Air.
Other: Individually coordinated
Fork
Pike Ultimate 140mm
TruTune mod
Fork:
Rock Shox Pike Ultimate 140mm.
Other: TruTune mod
Headset:
Cane Creek FORTY
Handlebars
Basel stick 35mm
Fiberworks Baslerstab
Handlebar:
Another Baslerstab 35mm.
Other: Baslerstab fiber plant
Rear derailleur
Eagle X01
Fraezen Kaefig Cage Mod
Rear derailleur:
SRAM Eagle X01.
Other: Fraezen Kaefig Cage Mod
Cranks:
SRAM X01 Eagle DUB
Chainrings/sprockets
32T Oval
Chainrings / sprockets:
OneUp Components 32T Oval
Bottom bracket:
SRAM BSA DUB
Cassette/Rear Gear
Eagle X01 12 speed
Cassette/Rear Gear:
SRAM Eagle X01 12-speed
Hubs:
Other Trailmech Enduro
Front wheel:
Onza porcupine
Rear wheel:
Onza porcupine
Saddle:
San Marco Aspide Carbon
Seat post
Fall line R 150 mm
Seat post:
9point8 fall line R 150 mm
Seat post clamp:
Other Revel
general information
Riding type:
Trail/All Mountain
Weight: 14,020g (30lb 14.5oz)
Custom made using all fully mechanical parts as after trying the electronics I still prefer the traditional system. There’s absolutely nothing wrong with the electronics, but I just like the mechanical feel. There have been some tweaks to the rear shock and a TruTune Carbon insert on the Pike 140mm fork to ensure a vibration-free launch and better ramp control. The award winning Trailmech Enduro hubs were chosen for this bespoke wheel build as the Vortex system is simply fantastic and they are attached to XYZ Pro Carbon Fiber AM rims with silver spokes to match the silver parts and also the deep purple color scheme of the to highlight the frame properly. To save some extra weight, the Baslerstab handlebar with integrated stem from Farbwerk is used together with the 9Point8 Fall Line R seatpost to easily add additional weight compared to other handlebar-stem combinations or other heavier seatposts that weigh around 500 grams 250 to 300 g to save 600 grams.
Additional information:
Custom made using all fully mechanical parts as after trying the electronics I still prefer the traditional system. There’s absolutely nothing wrong with the electronics, but I just like the mechanical feel. There have been some tweaks to the rear shock and a TruTune Carbon insert on the Pike 140mm fork to ensure a vibration-free launch and better ramp control. The award-winning Trailmech Enduro hubs were chosen for this bespoke wheel build as the Vortex system is simply fantastic and they are attached to XYZ Pro Carbon Fiber AM rims with silver spokes to match silver parts and also the deep purple color scheme of the frame really highlighted. To save some extra weight, the Baslerstab handlebar with integrated stem from Farbwerk is used together with the 9Point8 Fall Line R seatpost to provide greater weight compared to other handlebar-stem combinations or other heavier seatposts that weigh around 500 to 500 grams. Easily save an additional 250 to 300 g 600 grams.